Nucleic Acid Remover (250ml*2)

Product Description/Introduction

The Nucleic Acid Remover composed of Nucleic Acid Remover Reagent A and Nucleic Acid Remover. The two solutions have no nucleic acid degradation effect when used alone, and have powerful nucleic acid degradation function when mixed in equal proportions, which can remove high levels of contaminated DNA and RNA from the surfaces of various articles as well as in the air within a short period of time. It can be used for the removal of nucleic acid contamination in the laboratory, and it is capable of completely degrading contaminated DNA and RNA at the level of PCR sensitivity.

Storage and Shipping Conditions

Ship at room temperature; Store at 2-8℃, valid for 12 months.

Assay Protocol / Procedures

Replace the cap of reagent bottle with the exclusive spray nozzle. Change the spraying state by rotating the spray nozzle.The sign "X" on the top of nozzle indicate “off”; "……" indicate “on” and spary in a single direction; "shower icon" indicate “on” and spray in multiple directions.

Spray Reagent A on the surface of the workbench, instrumentation, plastic or glass containers, pipettes and other items that need to be cleaned, then spray Reagent B immediately at the same location, let it stand for 5-10 min, moisten the surface with distilled water, and then dry it with clean absorbent paper (the surface of the items can be moistened repeatedly with distilled water for several times before drying it with absorbent paper).

Note

1. This product is safe to use, non-toxic, but do not spray directly in contact with skin, eyes and mucous membranes. If contacted, immediately rinse off with plenty of water. 

2. This product can only be used on the surface of the instrument and equipment can be wiped clean position, after use with distilled water to wet wash and wipe clean; have a special coating on the surface of the equipment to be used with caution (coating material variety, it is recommended to confirm that the coating does not have an impact on the large number of use).

3. The spray nozzle should be turned off after using the product to ensure that the product is kept airtight.

4. For your safty and health,please wear safety glasses, gloves, or protective clothing.

For Research Use Only!